226 meder electronic www.meder.com reed sensors for pcb mounting mk06 series mk06 sensors are magnetically operated reed proximity switches for direct pcb mounting. the sensor should be mounted on a fxed surface with the actuating magnet on the moving surface. introduction or removal of the magnetic feld determines the closing and opening of the reed switch. (2.54 mm pcb pin spacing, available with different distances) applications ? telecommunications telephone hook switch, keyboard applications ? domestic appliances door switch for washing machines, dishwashers, microwave ovens, baking ovens, refrigerators ? limit switch for low-power signals garage door controls, lever hoists, conveyors ? lifts / elevators position indicators part number example mk06 - 4 - c 4 is the packaging size c is the magnetic sensitivity order information magnetic sensitivity description features form a, b, c and e (latching) available high power switches available various case sizes available five operate sensitivities available ? ? ? ? part number example mk06 - 10 - e e selects the latching option sensitivity class pull in at range b 10 - 15 c, h 15 - 20 d, i 20 - 25 e, k 25 - 30 series packaging size magnetic sensitivity mk06 - 10 x - x options 4 b, c, d, e 5 b, c 6 b, c, d, e 7 b, c, d, e 8 (form a) b, c, d, e 8 (form b) h, i, k series contact form mk06 - 10 x * options b e * see footnote on following page.
227 meder electronic www.meder.com dimensions all dimensions in mm [inch] * mk6-10-e is a magnetic latching sensor which is opened or closed by a passing magnet and remains in that state until a magnet of opposite polarity or direction passes by again. the e refers to a latching sensor and does not represent the magnetic sensitivity. mk6-10-b is a normally closed sensor. the b refers to a latching sensor and does not represent the magnetic sensitivity. mk06 series reed sensors for pcb mounting
228 meder electronic www.meder.com reed sensors for pcb mounting mk06 series contact data all data at 20 c switch model contact form packing style switch 66 form a, b, c 6, 7, 8, 10 switch 80 form a 4 contact ratings conditions min. typ. max. min. typ. max. units switching power any dc combination of v & a not to exceed their individual max.s 10 10 w switching voltage dc or peak ac 200 170 v switching current dc or peak ac 0.5 0.5 a carry current dc or peak ac 1.25 0.5 a static contact resistance w/ 0.5 v & 10ma 150 200 p dynamic contact resistance measured w/ 0.5 v & 50ma , 1.5 ms after closure 200 250 p insulation resistance across contacts 100 volts applied 10 10 * 10 9 breakdown voltage across contact voltage applied for 60 sec. min. 225 * 210 vdc operate time incl. bounce measured w/ 100 % overdrive 0.5 0.6 ms release time measured w/ no coil suppression 0.1 0.1 ms capacitance at 10 khz cross contact 0.2 0.2 pf contact operation ** must operate condition 6whdgvwdwhhog 10 30 10 30 at must release condition 6whdgvwdwhhog 4 27 4 27 at environmental data shock resistance 1/2 sinus wave duration 11 ms 50 50 g vibration resistance from 10 - 2000 hz 20 20 g ambient temperature 10c/ minute max. allowable -20 85 -20 85 o c stock temperature 10c/ minute max. allowable -35 85 -35 85 o c soldering temperature 5 sec. 260 260 o c please note: the indicated electrical data are maximum values and can vary downwards when using a more sensitive switch. * insulation resistance of 10 12 and breakdown voltage of 480 vdc is available. 7khvhdhvhihwrwkhfwprglhg5hhg6lwfkhvghvflehglr5hhg6lwfkvhfwlr&rvowidfwrliprh detail is required.
229 meder electronic www.meder.com contact data mk06 series all data at 20 c switch model contact form packing style switch 87 form a 5 switch 90 form c 8 contact ratings conditions min. typ. max. min. typ. max. units switching power any dc combination of v & a not to exceed their individual max.s 10 20 w switching voltage dc or peak ac 200 175 v switching current dc or peak ac 0.5 0.5 a carry current dc or peak ac 0.5 1.0 a static contact resistance w/ 0.5 v & 10ma 200 150 p dynamic contact resistance measured w/ 0.5 v & 50ma , 1.5 ms after closure 200 250 p insulation resistance across contacts 100 volts applied 10 9 10 9 breakdown voltage across contact voltage applied for 60 sec. min. 100 200 vdc operate time incl. bounce measured w/ 100 % overdrive 0.6 0.7 ms release time measured w/ no coil suppression 0.1 1.5 ms capacitance at 10 khz cross contact 0.2 1.0 pf contact operation ** must operate condition 6whdgvwdwhhog 10 30 15 40 at must release condition 6whdgvwdwhhog 4 27 at environmental data shock resistance 1/2 sinus wave duration 11 ms 50 50 g vibration resistance from 10 - 2000 hz 20 20 g ambient temperature 10c/ minute max. allowable -20 85 -20 85 o c stock temperature 10c/ minute max. allowable -35 85 -35 85 o c soldering temperature 5 sec. 260 260 o c please note: the indicated electrical data are maximum values and can vary downwards when using a more sensitive switch. * insulation resistance of 10 12 and breakdown voltage of 480 vdc is available. 7khvhdhvhihwrwkhfwprglhg5hhg6lwfkhvghvflehglr5hhg6lwfkvhfwlr&rvowidfwrliprh detail is required. reed sensors for pcb mounting
|
